Factory Reset - NETGEAR XAVN2001v1 Manual

XAVN2001 Powerline AV 200 Wireless-N Extender User Manual

Factory Reset

From the Advanced Settings tab on the Powerline Utility, the Factory Reset option returns the
network encryption key to its factory default value of HomePlugAV. Only one device at a time can
be reset.
Resetting to Factory Defaults
1. From the Advanced Settings tab, click the Factory Reset option and select the Powerline
device(s) to be reset.
Figure 2-13
2. Click the Perform Factory Reset on Selected Devices button. A confirmation message
displays.
3. Click OK to reset the device. A message indicates whether or not the operation succeeded.
4. After you have reset each device, check that the Device Settings tab lists all devices in the
network.
Note: If you customized your network encryption key, the local Powerline device will be
disconnected from the network when you reset it to the factory default. To avoid
this problem, reset all remote devices before you reset the local device.
2-16 Using the XAVN2001 Powerline Utility
v1.0, July 2010