Led And Feature Descriptions - NETGEAR XAVN2001v1 Manual

Powerline av 200 wireless-n extender
Table of Contents

Advertisement

XAVN2001 Powerline AV 200 Wireless-N Extender User Manual

LED and Feature Descriptions

The following table describes the buttons, status lights, and Ethernet port on the XAVN2001
Powerline AV 200 Wireless-N Extender.
Table 1-1. XAVN2001 Feature Descriptions
Item
Description
Power
• Solid green. The electrical power is on.
LED
• Blinking green.The adapter is in the process of restarting or setting up security.
• Amber. Power saving mode. The unit enters power saving mode if the Ethernet port is not
linked for more than 10 minutes.
• Off. There is no electrical power, or has been turned off through the Powerline utility.
Powerline
• Solid. The adapter is connected to a Powerline network.
LED
• Blinking. The adapter is sending or receiving data.
• Off. The adapter has not found any other compatible Powerline devices using the same
encryption key, or has been turned off through the Powerline utility.
The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, indicated
by the color displayed by the LED:
Green: Link rate > 80 Mbps
(Best) - Good for HD video
Ethernet
• Solid. The Ethernet port is linked, but there is no activity.
LED
• Blinking. There is traffic on the Ethernet port.
• Off. There is no Ethernet connection, or it has been turned off through the Powerline utility.
Factory
Press the Factory Reset button for 1 second, then release to return the Powerline adapter to its
Reset
factory default settings.
Security
If you set security on your other adapters, after you plug your new AV adapter into the wall
Button
socket, press its security button for 2 seconds; then press the security button on any adapter in
your existing network for 2 seconds. Both buttons must be pressed within 2 minutes.
Note: The Security button does not work in power saving mode. The unit enters power saving
mode if the Ethernet port is not linked for more than 10 minutes.
Ethernet Port
Plug one end of the Ethernet cable that comes with the XAVN2001 Powerline AV 200 Wireless-
N Extender into this port and the other end either into your router, or into the computer or
other peripheral devices.
1-4
Amber: Link rate >50, <80 Mbps
(Better) - Good for SD Video
Installation and Basic Configuration
v1.0, July 2010
Red: Link rate < 50 Mbps
(Good) - Good for data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xavn2001v2

Table of Contents