Returning To The Default Network Encryption Key - NETGEAR XAVN2001v1 Manual

XAVN2001 Powerline AV 200 Wireless-N Extender User Manual

Returning to the Default Network Encryption Key

1. Plug the new device into an AC power outlet.
2. Start the XAVN2001 Powerline Utility
• Wait for the utility to detect the devices in your Powerline network.
• Check that all the devices in the established network are displayed on the Device Settings
tab.
Note: Before you can reset a remote device, you must enter its password. The
password is printed on the product label located on the back of the adapter.
3. From the Advanced Settings tab, click the Security arrow, and from the Device Name
column, check the box next to each device you want to set.
4. Click the Use Default Encryption Key button.
You will see the default encryption key, HomePlugAV, display in the encryption field.
5. Click Apply Security to Selected Devices.
Figure 2-9
2-12 Using the XAVN2001 Powerline Utility
v1.0, July 2010