Connecting A Powerline Av Ethernet Adapter To The Router - NETGEAR XAVN2001v1 Manual

XAVN2001 Powerline AV 200 Wireless-N Extender User Manual

Connecting a Powerline AV Ethernet Adapter to the Router

1. Plug a Powerline AV 200 Wireless-N Extender into a power outlet near your router.
Use the supplied gray Ethernet cable to connect from the Adapter to a LAN port on your router
so that the Powerline network can gain access to the Internet. The Power and Ethernet lights
on the Powerline AV 200 Wireless-N Extender should turn on.
Note: It is not necessary to disconnect your router from your computer.
Router
Figure 1-3 Connecting the XAV2001 to a Router
2. Once plugged in and power is first applied, check to see that the Power light is on.
3. After approximately 10 seconds, check to see that:
a. The Power light is solid green.
b. The Powerline LED is lit.
c. The Ethernet light is on or blinks.
1-6
XAVN2001 Powerline
AV 200 Wireless-N
Supplied Ethernet cable
Desktop PC
Installation and Basic Configuration
v1.0, July 2010
Laptop PC