Table of Contents
Advertisement
To install the thermostat:
3. Gently separate the backplate from the thermostat.
4. Place the thermostat backplate on the wall. Make sure that any ex-
isting wires can be inserted through the opening on the backplate.
5. Using the backplate as a template, mark the location of the mount-
ing holes on the wall as shown below.
Fig. 1 - - The solid color indicates mounting holes
6. Move the backplate out of the way and make holes where indicat-
ed in Step 3. The mounting holes can accommodate a #6 pan- -
head screw. It is recommended to use the included fasteners to en-
sure proper fitting of the front housing.
7. Use the included drywall plugs (or other suitable anchors) to en-
sure the thermostat can be mounted securely to the wall.
8. Fasten the backplate to the wall using the screws provided (or oth-
er suitable screws).
W2
W
Y2
C
RH
RC
G
AUX
O/B
9
Y
N/C
A13338
Advertisement
Table of Contents
