Table of Contents
Advertisement
want the auxiliary heat (if installed) to engage to help meet the set
temperature. The temperature range is adjustable from 0 to 65° F
(–17.8 to 18.3° C) or can be completely disabled. Note: You need
an Internet connection for this feature to operate properly.
Aux Heat Settings
Max Outdoor Temperature Configures the maximum outdoor
d
temperature threshold. Above this level, the auxiliary heat will
not be activated. The temperature is adjustable from 0 to 80° F
(26.5° C) in increments of 0.5° F (0.3° C). The default value is
70° F (21° C).
Common Heat/Cool Settings
Heat Differential Temp The minimum difference between the
d
current temperature and set temperature before the system calls
for heat. A smaller difference means shorter cycle times, whereas
a larger difference results in longer cycle times. The temperature
range is adjustable from 0 to 3° F (- -17.5 to 26.5° C) in 0.5° F
(0.3° C) increments.
Heat Dissipation Time The amount of time the fan will run after
d
the heat set point has been reached and the call for heat has been
turned off. Running the fan for a period of time allows for any
heated air left in the ducts to circulate throughout the home. The
time is adjustable from 0 to 900 seconds. The default value is 30
seconds.
Cool Differential Temp The minimum difference between the
d
current temperature and set temperature before the system calls
for cool. A smaller difference means shorter cycle times, whereas
a larger difference results in longer cycle times. The temperature
range is adjustable from 0 to 3° F (0.3 to 1.7° C) in 0.5° F (0.3°
C) increments.
Cool Dissipation Time The amount of time the fan will run after
d
the cool has been turned off. Running the fan for a period of time
allows for any cooled air left in the ducts to circulate throughout
the home. The time is adjustable from 0 to 900 seconds. The de-
fault value is 30 seconds.
26
Advertisement
Table of Contents
