TRENDnet TEG-S50ES User Manual page 7

5-port gigabit edgesmart switch

Table of Contents

TRENDnet User's Guide

User Name: admin

Password: admin

Note: User name and password are case sensitive.

6. Click System and then click IPv4 Setup.

7. Configure the switch IP address settings to be within your network subnet, then click

Apply.

Note: You may need to modify the static IP address settings of your computer's network

adapter to IP address settings within your subnet in order to regain access to the switch.

8. When confirmation message appears click OK.

NOTE: The configured settings are only applied to the switch's temporary memory and

will be lost upon the next power-cycle. Please follow these next steps to save the

configurations to the switch's NV-RAM to ensure the settings will remain throughout

power-cycles and reboots:

TEG-S50ES

Table of Contents