Battery Status And Charging - Philips Sonicare DiamondClean Smart HX9957/51 Manual

f. Travel case (specific types only)

Battery status and charging

Charging with glass (specific types only)
Charging with travel case (specific types only)
35_021_2499_1_Booklet_Lux_A6_US_v1.indd 21
Your Philips Sonicare comes with a travel case to
make traveling with your power toothbrush more
convenient. It is designed to accommodate the
power toothbrush handle and two brush heads.
Some models come with a USB charging travel
case which connects to your laptop via USB -this
allows you to charge your Philips Sonicare when
traveling. For information about charging your
Philips Sonicare with the travel case, see ‚Battery
status and charging'.
1 Plug the charging base into a wall socket.
2 Place the charging glass on top of the charging
base and place the handle in the glass.
The charging indicator flashes white until your
toothbrush is fully charged.
1 Place the handle in the charging travel case.
2 Connect the charging travel case to a UL
60950-1 and IEC 60950-1 Listed computer,
laptop, USB hub, USB receptacle, or wall
adapter. The USB cord is attached to the
travel case and stored in the cord storage
compartment.
3 The wall adapter shall have an output marked
Class 2 or the limited power source (LPS)
requirements and compatible with the electrical
ratings marked on the travel case.
4 The battery indication flashes white until your
toothbrush is fully charged.
21
English
13/02/17 16:38