Connecting The Scansnap To A Wireless Lan (Ix500/Ix100) - Fujitsu ScanSnap iX1600 Basic Operation Manual

Connecting the ScanSnap to a Wireless LAN (iX500/
iX100)
The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for
connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool
can be used to configure and check the following wireless LAN settings and connection.
l Connecting the ScanSnap to a wireless access point
l Registering the computer that will be connected to the ScanSnap via wireless LAN
l Setting the IP address, name, and password for the ScanSnap
l Checking the connection between the ScanSnap and the computer (iX100)
l Checking the connection between the ScanSnap and the mobile device
Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless
settings.
1.
Start the ScanSnap Wireless Setup Tool.
l Windows 10
Select [Start] menu → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].
l Windows 8.1
Click
Tool] under [ScanSnap Manager] on the All apps screen.
l Windows 7
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap Wireless
Setup Tool].
a The ScanSnap Wireless Setup Tool will start running.
2.
Click the [Wireless Network Setup Wizard] button
menu.
a The Wireless Network Setup Wizard appears.
3.
Follow the instructions in the Wireless Network Setup Wizard to configure
the wireless settings.
For iX100, configure and check the wireless settings based on the wireless LAN environment
in which the ScanSnap is used.
HINT
l For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup
Tool Help.
l The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.
on the lower left side of the Start screen, and select [ScanSnap Wireless Setup

Connecting the ScanSnap to a Wireless LAN (iX500/iX100)

129
in the main