Table of Contents
Advertisement
Memory module
Description
2048-MB (1-DIMM, PC2-5300, 667 MHz)
1024-MB (1-DIMM, PC2-5300, 667 MHz)
512-MB (1-DIMM, PC2-5300, 667 MHz)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the memory module:
Position the computer with the front toward you.
1.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module compartment
2.
cover to the computer.
Lift the left side of the cover (2) and swing it to the right.
3.
Remove the memory module compartment cover.
4.
NOTE:
464114-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
5.
(The edge of the module opposite the slot rises away from the computer.)
Battery on page
The memory module compartment cover is included in the Plastics Kit, spare part number
36).
Component replacement procedures
Spare part number
455454-002
441406-002
441405-002
41
Advertisement
Table of Contents
