Simrad GC80/85 Dual MK2 Gyro Compass
4.4
Display present settings for each compass
DISP
Display state
Normal operation
DISP
press on DISP button
1
st
DISP
press on DISP
2
nd
button
DISP
3
press on DISP button
rd
DISP
4
press on DISP button
th
DISP
988-12720-002
When pressing the DISP button on the GC80/85 Control unit, the system
loops through a display sequence showing present settings for the system.
The sequence depends on whether an external compass is connected.
When an external compass is connected, the readout depends on active
compass.
The following sections; Displaying settings with no external sensor
connected and Displaying settings with external sensor connected, show
examples of how the present settings are presented by pressing the DISP
button.
The display is used as follows:
-
The first row in the display shows the value.
-
The second row displays code used for identification.
Displaying settings with no external sensor
connected
Display
GYRO
EXT
Description
-
True output bearing
-
Active compass
-
Gyro compass bearing without correction
-
Active speed input source indication (GPS,
Manual, Log or Serial Log)
-
Latitude
-
Latitude indication: north (LA.n) or south
(LA.s)
-
Vessel speed
-
Speed input indication
(GPS, Manual, Log or Serial Log)
-
Rate of turn in °/min
-
Rate of turn indication
-
Error codes (up to 4)
-
Error indication
18