Technical Service; Replacement Parts; Important Notices - Canada - Superior Fireplaces WRE6036RS Assembly, Installation And Operation Instructions

Outdoor wood burning fireplace
Hide thumbs Also See for WRE6036RS:
Table of Contents

Advertisement

TECHNICAL SERVICE

You may have further questions about installation, operation, or
troubleshooting. Please contact your IHP dealer for any questions
or concerns a. When contacting your dealer please have your model
and serial numbers of your fireplace ready. You can also visit our web
site at SuperiorFireplaces.us.com.

REPLACEMENT PARTS

See Pages 24 to 26 for a complete replacement parts list. Use only
parts supplied from the manufacturer.
Normally, all parts should be ordered through your IHP distributor
or dealer. Parts will be shipped at prevailing prices at time of order.
When ordering repair parts, always give the following information:
1. The model number of the fireplace.
2. The serial number of the fireplace.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the fireplace.
If you encounter any problems or have any questions concerning the
installation or application of this fireplace, please contact your dealer.
IHP
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
Visit us at SuperiorFireplaces.us.com
127008-01_E
A manufactured shroud which has been approved by a
national testing agency for use with this fireplace may
be used if installed in accordance with the instructions
by its manufacturer. A locally fabricated shroud may be
used with IHP Shroud Leg Spacer Kit (SLK) in accor-
dance with instructions provided with the shroud.
NOTICE: The firebox canopy (hood) must not be mod-
ified or replaced with a canopy that may be provided
with the unvented decorative room heater.
CAUTION: THE STRUCTURAL INTEGRITY OF THE
MANUFACTURED HOME FLOOR, WALL, AND CEIL-
ING/ROOF MUST BE MAINTAINED.
WARNING: DO NOT INSTALL IN SLEEPING ROOM
OF MOBILE HOMES.
Canadian code CAN/ULC-S610-M87 and other pertinent codes require stain-
less steel chimney for the installation of this fireplace. A Cold Air Climate Kit is
also required in Canada and is recommended for cooler regions in the United
States. Below, find a list of approved stainless steel parts.
Catalog
Model
No.
No.
F0953
12-12HT
F0954
18-12HT
F0955
24-12HT
F0956
36-12HT
F0957
48-12HT*
F0958
30E-12HT
F0959
12S-12HT
F0960
RLT-12HT* Round Top w/ Louvers
F0961
AP-12HT
F0951
CAK-12
*When ordered alone, this part cannot ship via parcel delivery services.
SuperiorFireplaces.us.com

IMPORTANT NOTICES - CANADA

IMPORTANT NOTICE
Chimney Parts List for Canada
12" Hi-Temp
Wood-burning Chimney
12" Section Double Wall Pipe
18" Section Double Wall Pipe
24" Section Double Wall Pipe
36" Section Double Wall Pipe
48" Section Double Wall Pipe
30" Offset and Return
Chimney Support
Anchor Plate/Collar Assembly (Masonry Fireplaces)
Cold Air Collar Kit
21

Advertisement

Table of Contents
loading

Table of Contents