Abs Mode; Quickshifter + (Optional); Shift Light - KTM 890 DUKE 2021 Owner's Manual

7 COMBINATION INSTRUMENT

7.16.29 ABS Mode

7.16.30 Quickshifter + (optional)

7.16.31 Shift Light

40
Condition
• The motorcycle is stationary.
• ABS is switched on.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button until ABS Mode is marked on the
display.
–
Keep the SET button pressed for 3-5 seconds to change the
F02777-01
ABS mode.
Info
Do not open the throttle during the selection.
If the ABS mode Road is enabled, ABS controls both
wheels.
If the ABS mode Supermoto is enabled, ABS only con-
trols the front wheel. The rear wheel is not controlled
by ABS and may lock during braking maneuvers. MSR
(optional) has been deactivated.
After the ignition is switched back on, the ABS mode is
reset to Road.
Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button until Quick Shift + is marked on
the display.
–
Switch quickshifter + (
ton.
F02778-01
Condition
• The motorcycle is stationary.
• ODO > 1,000 km (600 mi).
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until the Motorcycle menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button until the Shift Light menu is
marked on the display. Press the SET button to open the menu.
–
Press the UP or DOWN button to select the function. Use the
V01134-01
SET button to set the engine speed for the gear shift recom-
mendation.
Once the engine speed reaches the engine speed specified at
Lights up, the speed display lights up orange.
Once the engine speed reaches the engine speed specified at
Flashes, the speed display flashes orange.
p. 53) on and off using the SET but-