Method Of Disassembly - Pioneer PDP-614MX Service Manual

METHOD OF DISASSEMBLY

(Caution) 1. Before disassembly, turn power off the main unit and pull out the power plug from the wall outlet.
CLASS A: PX-61XM3J,61XM3A,61XM3W,61XM3G, CLASS B: PDP-614MX,PRO-1410HD,PX-61XR3A,61XR3W,61XR3G
1. Outlined method of disassembly
The outlined procedures for the disassembly of the major parts
In regard to the details of disassembly, cautions, etc., refer to the method of replacement for each part [page indicated in ( )].
SET
STAND
(with a STAND)
(P10-2)
Modifications of
a STAND
(P10-11)
SET
(without a STAND)
* Modification means that the screws
are mounted or removed.
2. Use a screwdriver with a fitting size. Otherwise, the screw threads may be damaged.
3. Reassembly can be carried out in the reverse order for disassembly. Refer to the disassembly procedures and forward
reassembly in the reverse order.
4. The order for taking out the parts (or components) is indicated by the foregoing numeral that is attached to the name of
each part.
5. The wire connector symbol is indicated by two digits of Marking
6. Class A or Class B in the text is applicable to the models specified below.
BACK COVER
(P10-3)
Modifications of
*
a BACK COVER *
(P10-12)
BACK COVER
(P10-3)
. Read CN-
are shown below (disassembled in the direction of
CHASSIS ASSY PDP
(P10-4)
(P10-5)
F-BRACKET(OUT) ASSY
FRONT PANEL
(P10-10)
F-BRACKET B(OUT)
(P10-9)
TERMINAL PANEL M SUB ASSY
(P10-13)
TERMINAL PANEL S
(P10-15)
COVER SW
(P10-16)
TERMINAL PANEL B SUB ASSY
(P10-17)
POWER UNIT SENB PWB
(P10-20)
(P10-19)
SENC PWB
SEND PWB
(P10-20) (P10-20)
10-1
when examining the table of parts.
).
F-BRACKET(IN)
(P10-6)
(P10-8)
COVER CTL
LED PWB
(P10-9) (P10-9)
CONTROL BUTTON
CTL PWB
(P10-9)
(P10-9)
TERMINAL PANEL M MAIN PWB
(P10-14)
232C PWB
(P10-15)
PWR PWB
POWER BUTTON
(P10-16)
(P10-16)
TERMINAL PANEL B
AUDIO PWB
(P10-18)
(P10-18)
FAN
AC INLET
(P10-20)
(P10-18)
FILTER
(P10-6∼10-7)
(P10-14)