2. Image errors
(Caution) Typical abnormal images are shown below. All errors do not always fall on these error samples.
(1) Image burn and deterioration in brigh tness
Residual images are seen
without signal entry.
This is not a fault.
Deterioration in brightness
This is not a fault.
(2) Failure in writing
Failure in writing
The PDP is fault.
(Refer to P7-1 "HOW TO DIAGNOSE THE PDP MODULE".)
A
All-whitesignal
All-whitesignal
All-whitesignal
8-8
No signal
Dot errors change
with no continuity.