ZyXEL Communications GS2220 Series User Manual page 441

The following table describes the labels in this screen.
Table 231 Management > MAC Table
L ABEL DESC RIPT IO N
Condition Select one of the buttons and click
you specified.
Select
All
Select
Sta tic
Select
MAC
Select
VID
specified VLAN.
Select
Po rt
are forwarded on the specified port.
Select
T runk
in the trunk group.
Sort by Define how the Switch displays and arranges the data in the summary table below.
Select
MAC
Select
VID
Select
PO RT
Transfer Type Select
Dyna m ic to MAC fo rwa rding
learned MAC address entries in the summary table below into static entries. They also display in
the
Sta tic MAC Fo rwa rding
Select
Dyna m ic to MAC filte ring
MAC address entries in the summary table below into MAC filtering entries. These entries will then
display only in the
Search Click this to search data in the MAC table according to your input criteria.
Transfer Click this to perform the MAC address transferring you selected in the
Cancel Click
C a nc e l
Index This is the incoming frame index number.
MAC Address This is the MAC address of the device from which this incoming frame came.
VID This is the VLAN group to which this frame belongs.
Port This is the port where the above MAC address is forwarded.
Type This shows whether the MAC address is
entered in the
Se a rc h
to display any entry in the MAC table of the Switch.
to display the MAC entries manually configured on the Switch.
and enter a MAC address in the field provided to display a specified MAC entry.
and enter a VLAN ID in the field provided to display the MAC entries belonging to the
and enter a port number in the field provided to display the MAC addresses which
and type the ID of a trunk group to display all MAC addresses learned from the ports
to display and arrange the data according to MAC address.
to display and arrange the data according to VLAN group.
to display and arrange the data according to port number.
and click the
screen.
and click the
screen and the default filtering action is
Filte ring
to change the fields back to their last saved values.
Sta tic MAC Fo rwa rding
GS2220 Series User's Guide
441
to only display the data which matches the criteria
button to change all dynamically
T ra nsfe r
button to change all dynamically learned
T ra nsfe r
(learned by the Switch) or
dyna m ic
screen).
.
Disc a rd so urc e
field.
T ra nsfe r T ype
(manually
sta tic