Anti-Arpscan Status; Anti-Arpscan Host Status - ZyXEL Communications GS2220 Series User Manual

• Go to
Ba sic Se tting
again.
• Go to
Applic a tio n
interval expires, the closed ports will become active and start receiving packets again.
• Use the command port no inactive.
• Refer to the port logs to see when a port was closed.
37.2 Anti- Arpsc a n Sta tus
Use this screen to see what ports are trusted and are forwarding traffic or are disabled. To open this
screen, click
Fig ure 257
The following table describes the fields in the above screen.
Table 172 Advanced Application > Anti-Arpscan Status
L ABEL
Anti-Arpscan is....
Port
Trusted
State
37.3 Anti- Arpsc a n Ho st Sta tus
Use this screen to view blocked hosts and unblock ones connected to certain ports. To open this screen,
click
Adva nc e d Applic a tio n
>
Po rt Se tup
> >
Errdisa b le
Adva nc e d Applic a tio n
Advanced Application > Anti-Arpscan Status
DESC RIPT IO N
This shows whether
This field displays the port number of the Switch.
This field displays whether the port is trusted or untrusted.
a trusted port.
This field displays whether the port can forward traffic normally (
( ).
Err- Disa b le
>
Anti- Arpsc a n
GS2220 Series User's Guide
. Clear and click
Ac tive
and set the interval for
Errdisa b le Re c o ve ry
> .
Anti- Arpsc a n
is enabled or disabled on the Switch.
Anti- a rpsc a n
> .
Ho st Sta tus
340
. Then select
Apply Ac tive
Anti- a rpsc a n
Anti- a rpsc a n
Fo rwa rding
and click
Apply
. After the
is not performed on
) or is disabled