Power Saving - Wacom DTF-720 User Manual

3.
Using the OSD controls, open the OSD Menu and select the PITCH icon.
4.
Adjust the Pitch level so the pattern of fine vertical stripes displays evenly.
5.
In the OSD Menu, select the Phase icon and adjust the Phase level so the
adjustment pattern shows clearly.
6.
After completing the adjustments press the ENTER ( ) button and MENU ( )
button to exit the OSD Menu.
Click on the Cancel button or press ESC to exit the calibration screen.
Hint

Power Saving

DTF-720 conforms to VESA and Energy Star power saving guidelines. When
using DTF-720 with a VESA DPMS Display Power Management Signaling
(DPMS) compliant computer or graphics card, the display will automatically
comply with the below power saving parameters.
Power Saving Mode H-sync
Power ON
Standby mode
Suspend mode
OFF mode
(1280 x 1024 resolution under Windows only): You can also adjust
Pitch and Phase in the closing Windows display.
If the pitch is not calibrated, vertical moire appears in the
darkened area. And if the phase is not calibrated, the darkened
area riffles.
V-sync
Yes
No
Yes
No
Video Power Consumption Power Lamp
Yes Active
Yes Blanked
No Blanked
No Blanked
37W max. Blue
2W max. Orange/Blue
2W max. Orange/Blue
1W max. Orange
25