Power Saving Features - Wacom Intuos CTL-480 User Manual

POWER SAVING FEATURES

When configured for wireless operation, Intuos uses a number of power saving features to conserve the
tablet battery charge and improve performance.
Power saving mode
Sleep mode
Important: Conserve battery power by turning off the wireless module when you are not using the
tablet. Push the power button on the wireless module to turn it off. Otherwise, the tablet battery
may need charging before you can again use the tablet wirelessly. See
Contents Contents Index
Contents Index
Tablet enters power saving mode after 2 minutes of no user input. The time
parameter can be adjusted in the Wacom Tablet control panel. See
wireless connection status.
Depending on your tablet model, wake from power saving mode by touching the
tablet, pressing an ExpressKey, or placing the pen in proximity.
Tablet enters sleep mode:
• When there is no wireless connection for more than 4 seconds. For example,
you switch off the computer, move the tablet out of range, or unplug the
wireless receiver. To resume operations, correct any problem and ensure the
tablet is within range of your computer. Then press the power button on the
Wacom wireless module. See
• After 30 minutes of no user input.
• When the battery level is extremely low. Recharge the battery immediately.
To wake from sleep mode, press the power button on the wireless module.
Depending on your tablet model, touch the tablet surface with your finger or the
pen. Then move your finger or pen along the tablet to fully activate Intuos.
Contents Index
Index
Testing your
Battery and
tablet.
Battery life information.
45 45
45
45