Using An Alternate Mount Or Stand - Wacom DTF-720 User Manual

DTF-720 Component Functions

Using an Alternate Mount or Stand

If you will be using DTF-720 in an installation that requires the use of an alternate
mounting platform, you can remove the adjustable stand from DTF-720 and mount the
pen display onto a VESA conforming mount arm or stand.
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7
mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm. Exceeding
the screw clearance depth of 15 mm will damage DTF-720 internal components.
To remove the adjustable stand and attach DTF-720 to a different mounting platform:
1.
Turn off your computer
and power off DTF-720.
Then disconnect all cables
from DTF-720.
2.
Protect the display screen sur-
face by spreading a soft cloth
onto a flat table and placing
DTF-720 face down on the
cloth.
3.
Remove the four screws
and lift the adjustable stand
assembly away from the body
of DTF-720.
4.
Using the appropriate screws
for your mounting platform,
firmly attach DTF-720 to the
alternate mounting platform.
5.
Rettach the cabling.
CAUTION
When attaching DTF-720 onto
an alternate mounting platform,
be sure to follow all instructions
in the documentation supplied
by the platform manufacturer.
If improperly installed, the unit
could fall and be damaged.
18
unscrew