Attaching The Shoulder Strap - Canon XH A1 Instruction Manual

Using the Viewfinder and the LCD Panel Simultaneously
By default, the viewfinder display is turned off while you use the LCD panel. Follow the procedure below
to use both of them simultaneously.
MENU
DISPLAY SETUP/
( 25)
1. Press the MENU button.
2. Turn the SELECT/SET dial to select [DISPLAY SETUP/
3. Select [CVF+LCD ON], set it to [ON] and press the dial.
4. Press the MENU button to close the menu.
Changing the Viewfinder and the LCD Panel to Black & White Display
The LCD display and the viewfinder are both color displays. Follow the procedure below to turn both of
them to black & white display mode.
MENU
DISPLAY SETUP/
( 25)
1. Press the MENU button.
2. Turn the SELECT/SET dial to select [DISPLAY SETUP/
3. Select [CVF+LCD BW], set it to [ON] and press the dial.
4. Press the MENU button to close the menu.
Fastening the Grip Belt
Adjust the grip belt so that you can reach the
zoom lever with your index and middle finger,
and the start/stop button with your thumb.

Attaching the Shoulder Strap

Pass the ends through the strap mount and
adjust the length of the strap.
Be careful not to drop the camcorder when adjusting the strap or the grip belt.
20
CVF+LCD ON•••OFF
CVF+LCD BW•••OFF
] and press the dial.
] and press the dial.