Connecting To A Monitor/Tv - Canon XH A1 Instruction Manual

Connecting to a Monitor/TV

The different recording modes and the corresponding output terminals are given in the table below:
HD [LETTERBOX] 1920x1080
set to [OFF]
[LETTERBOX] SD SDI
set to [ON]
SD in [LETTERBOX] 640x480
16:9 set to [OFF]
[LETTERBOX] SD SDI
set to [ON]
SD in 4:3 640x480
Connection to a High Definition TV or Monitor (HDTV/HiVision)
1 Using the SD/HD SDI Terminal
Open the terminal cover
The audio and time code are embedded along
with the video signal output.
Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the dial to
HD/SD SDI COMPONENT
Terminal OUT Terminal
D3 (1440x1080)
D1 (SD)
D1 (SD)
D1
D1 (SD) Normal
Set the switch to
the A/V1 position
STV-290N Stereo Cable
Signal flow
BNC Cable
(commercially available)
.
HDV/DV
Terminal
MPEG TS
MPEG TS
DV (SD)
DV (SD)
DV (SD)
yellow
Signal flow
(supplied)
Video
Terminals
INPUT
VIDEO
white
L
AUDIO
red
R
97
E