Protecting Images - Canon XH A1 Instruction Manual

Protecting Images

You can protect important images from accidental erasure when displaying a single image or the index
screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
1. Select the image you wish to protect.
2. Press the SELECT/SET dial to open the still image operations menu.
In mode, the menu appears when you press the SELECT/SET dial while you are
reviewing a still image, or if you press the SELECT/SET dial immediately after recording an image.
3. Select [ PROTECT].
4. Select [ON].
" " appears and now the image cannot be erased. To remove the protection select [OFF] instead.
5. Select [ CLOSE] to close the menu.
Protecting during Index Screen Display
MENU
CARD OPERATIONS
( 25)
1. Move the zoom lever toward W.
• Up to 6 images appear.
• Select the image you wish to protect.
2. Open the menu and select [CARD OPERATIONS]. Select [
the SELECT/SET dial.
• appears on the image.
• Select additional images with the SELECT/SET dial and protect them in the same way.
3. Close the menu to return to the index screen.
PROTECT
PROTECT] and press
123
E