Advertisement
Wired remote controller installation
Group control with your wired remote controller
Group control means that you are using one wired remote controller to control two or more indoor units at the same time.
1. Using one wired remote controller to control three indoor Units
Outdoor unit
COM1(F1, F2)
Wired remote
controller
2. Using one wired remote controller to control indoor units connected to different outdoor unit
Outdoor unit
COM1(F1, F2)
Outdoor unit
COM1(F1, F2)
Indoor unit
• Regardless of the indoor unit's group address (RMC address), only the indoor units connected to COM2 are
controlled in group.
CAUTION
• Regardless of your outdoor units, you can control a maximum of 16 indoor units as a group.
• When controlling group of indoor units connected to different outdoor unit, address of the each outdoor unit
must be set differently.
COM1(F1, F2)
Indoor unit
COM2(F3, F4)
Indoor unit
COM2(F3, F4)
COM2(F3, F4)
ENGLISH-10
COM1(F1, F2)
Indoor unit
COM2(F3, F4)
Wired remote
controller
Indoor unit
Advertisement
