Kenwood DDX6906S Instruction Manual page 66

Setup
User Interface Setup
You can setup user interface parameters.
1
Press the [ ]/[MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears. h
4
Set each parameter as follows.
■ [Beep]
Turn the key touch tone on or off.
Default is "ON".
[Widget SETUP]
■
Set up the widget displayed on the HOME
screen. (P.16)
[Parking Assist Display]
■
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
[Parking Assist Position]
■
Select where to display information about
obstacles on the screen (left or right).
"Left"/ "Right" (Default)
This can be set when the iDataLink
(commercially available) is connected.
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
Adjust the sensing position of the touch
panel. (P.67)
[Time Format]
■
Select the time display format.
"12-Hour" (Default)/ "24-Hour"
66
■
[Clock]
[RDS-SYNC] (Default): Synchronizes the clock
time with the RDS.
[Manual]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.66)
Ñ
Adjust the date and time
manually
1
Touch [Clock] on the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] on the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] on the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch [Set].