Table of Contents
Advertisement
8. (When the alert is OFF (disarmed) press ALERTS button to skip setting that alert value).
Note: Press the LIGHT button at any time to exit.
1. Hold the ALERTS button 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the +/- buttons to disarm the alert. The alert text goes from ON to OFF.
4. Press the LIGHT button to exit.
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.
• The flashing alert icon will indicate the type of alert HI or LO.
• Press any button to stop the alert from sounding.
• The alert icon will continue flashing while alert value is in alert range.
• Disarm the alert to stop the alert entirely.
HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS?
Your high and low temperature and humidity readings are recorded with time and date of
occurrence. Each time a new high or low reading is recorded, that reading with time and date of
occurrence will show.
To view your HI | LO records, simply press and release the TEMP button.
Viewing order:
•
Outdoor HI Temperature
•
Outdoor LO Temperature
•
Outdoor HI Humidity
•
Outdoor LO Humidity
•
Indoor HI Temperature
•
Indoor LO Temperature
•
Indoor HI Humidity
•
Indoor LO Humidity
•
Feels Like HI
•
Feels Like LO
•
Dew Point
Note: Dew Point does not have a time/date of occurrence.
HOW DO I DISARM ALERTS?
WHAT HAPPENS WHEN AN ALERT SOUNDS?
6 |
P a g e
Advertisement
Table of Contents
