Alerts; Set Alerts; Active Alerts; Disarm Alerts - La Crosse Technology C85845 Setup Manual

TE M P E R AT UR E & H U M ID I T Y A L ERTS
To set alerts:
1. Hold the

ALERTS

show. To set this alert value, press and release the
alert (ON).
2. When the alert is armed (ON) the alert value will flash. Press and release the
or - button to change alert values.
3. Press and release the
you do not wish to set an alert, press the
alert or to exit.
4. Press the SNOOZE/BACKLIGHT
Active Alert:
• The Alert Icon
alert.
• When armed alert value is reached, station will beep 5 times, once each minute,
until out of alert range.
• The flashing alert icon will indicate whether it is a LO or HI alert.
• Press any button to stop the temp alert sound.
• The alert icon will still flash while value is in alert range.
Disarm Alert:
1. ALERTS
Hold the
2. ALERTS
Press the
3. Press and release the
3. Press the SNOOZE/BACKLIGHT
High Alert Active
button to enter alert set mode. Outdoor HI ALERT OFF will
ALERTS button to confirm and move to the next alert. If
will only show when the alert is active, and indicate the HI or LO
button to enter alert setting menu.
button until you see the alert you wish to disarm.
+ or - button to disarm the alert. The alert will not sound.
ALERTS button again to move the next
button at anytime to exit the Alerts Menu.
button to exit.
Low Alert Active
+ or - button to arm this
Both Alerts are Off
+
10