Temp Intermittant: Why Does My Temp/Humidity Reading Come And Go; Why Am I Going Through Batteries Quickly; How Do I Change Between Fahrenheit And Celsius; Get Connected: Your La Crosse View™ App - La Crosse Technology V10-TH Faqs

Hide thumbs Also See for V10-TH:
Table of Contents

Advertisement

TEMP INTERMITTANT: WHY DOES MY TEMP/HUMIDITY READING COME AND GO?

RF (radio frequency) communication may come and go occasionally. This can be normal in
some environments (e.g. moister climates).
If a sensor goes out, please wait 2-4 hours for it to reconnect on its own. Please be patient
– these stations can reconnect on, after many hours out.
RF (radio frequency) communication is not always 100% on. Certain temporary conditions
can cause it to go out for a time (e.g. 100% humidity).
If a miss happens:
If sensor loses connection to the station for any reason, the station will show dashes after 30
minutes.
The station will search for 5 minutes every hour to reconnect with sensor.
Be sure you have good batteries. Manually search for your sensor by holding the SENSOR
button for three seconds.
Try this:
Bring your sensor within 10 feet of your station and make sure it is connected to the station.
After 15 minutes move the sensor into the next room with a wall between the sensor and the
station for 1 hour.
If there is no loss of signal in that hour, move the sensor just outside.
Continue moving the sensor back to its original location.
If you lose connection, look for sources of

WHY AM I GOING THROUGH BATTERIES QUICKLY?

Test a new set of
batteries.
When the batteries fail, please note the date and voltage again. This is helpful in determining
the problem.
Check for leaking batteries, which may damage the sensor.

HOW DO I CHANGE BETWEEN FAHRENHEIT AND CELSIUS?

On your sensor, open the battery cover and press the F/C button. This will change the
temperature display on the sensor only.
On your station enter the
on the station.
GET CONNECTED: YOUR LA CROSSE VIEW™ APP
Enjoy the added benefits of on-the-go monitoring when you are connected via your mobile
device. For support and guidance of your La Crosse View™ app, please visit:
o Android users:
http://www.lacrossetechnology.com/support/lacrosseviewandroid
o iOS users:
http://www.lacrossetechnology.com/support/lacrosseviewios
batteries.
Write down the date of installation and the voltage of the
program menu
interference.
to select Fahrenheit or Celsius temperature display
14 |
P a g e

Advertisement

Table of Contents
loading

Table of Contents