Arm/Disarm Alerts; Active Alert; Sensor Reception Indicators - La Crosse Technology V21-WTHV3 Manual

AR M / D ISA RM AL E RTS
1. Hold the ALERTS button 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the +/- buttons to disarm the alert. The alert text goes from ON to OFF.
4. Press the LIGHT button to exit.
AC TI V E AL ERT
• When armed alert value is reached, station will beep 5 times each minute until out of alert range.
• The flashing alert icon will indicate the type of alert HI or LO.
• Press any button to stop the alert from sounding.
• The alert icon will continue flashing while alert value is in alert range.
• Disarm the alert to stop the alert entirely.
S E N S O R R E CE P TI ON IND ICATOR S
There are Sensor Reception Indicators for your Temperature/Humidity Sensor, and Wind Sensor.
• When indicator is solid, sensor is connected.
• When indicator is flashing, it is searching for the individual sensor.
• If there is no indicator, the sensor is not connected.
SE N S OR I D & SE N SOR SEA RC H
Your station and each sensor have a unique ID number that will identify them in the La Crosse View app.
This has the added bonus of locking them into your weather station until you manually delete them.
View ID numbers in station:
Press and release the SENSOR button. The ID number and type will show on the bottom of the station.
• Station
• TH Sensor
• Wind Sensor
• Rain Sensor
Search for Individual sensors:
1. Press and release the SENSOR button to view sensor type and ID.
2. Hold the SENSOR button to search for all sensors. The reception indicator will flash for up to 3 minutes.
3. Allow up to 3 minutes to view sensor and ID on station.
Note: Once sensor is found search will stop. The reception indication will stop flashing.
Sensor and ID will show for 3 seconds.
Wi-Fi Wind Station Page | 15