4
Parts Replacement and Cleaning > PCB > Removing the Scanner Motor (M21) > Replacement Procedure
Removing the Reversal Motor (M10)
■ Replacement Procedure
1) Remove the No.2 deleivery
unit.("8) Remove the No.2 deleivery unit."(page
2) Remove the reversal motor.
- 1 connector
- 2 screws
x1
x2
4
Parts Replacement and Cleaning > PCB > Removing the Scanner Motor (M21) > Replacement Procedure
Removing the Scanner Motor (M21)
■ Replacement Procedure
4-53).)
1) Remove the ADF communication cable (only machines with ADF installed).
2) Open the platen board cover or the ADF.
3) Remove the reader rear cover.
4) Remove the scanner motor assembly.
- 1 connector
- 1 spring
- 3 screws
5) Remove the scanner motor.
- 4 screws
F-4-129
4-56
F-4-130
F-4-131
4-56