Table of Contents
Advertisement
SUPERSERVER 2027TR-HTQRF/HTFRF/HTRF USER'S MANUAL
1-2
Serverboard Features
A t t h e h e a r t o f t h e 2 0 2 7 T R - H T Q R F / H T F R F / H T R F s e r v e r l i e s t h e
X9DRT-HIBQF/HIBFF/HF, a dual processor serverboard based on the Intel
C602 chipset and designed to provide maximum performance. four of these
serverboards can be mounted in the SC217HQ-R1620B chassis.
The sections below cover the main features of the X9DRT-HIBQF/HIBFF/HF
serverboard (see Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRT-HIBQF/HIBFF/HF supports single or dual Intel Xeon
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors (www.supermicro.
com).
Memory
The X9DRT-HIBQF/HIBFF/HF has eight (8) DIMM slots supporting up to 256 GB
of DDR3-1600/1333/1066/800 MHz speed registered ECC SDRAM in up to
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V
voltages. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
Serial ATA
A Serial ATA controller is integrated into the C602 to provide up to a six-port 3 or
6 Gb/s SATA subsystem (two SATA 3 (6 Gb/s) in HDD bay 1-2 and four SATA 2 (3
Gb/s) in HDD bay 3-6). RAID 0, 1, 5 and 10 are supported. The SATA drives are
hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The SuperServer 2027TR-HTQRF/HTFRF/HTRF has for each node
one (1) PCI Express 3.0 x16 slot (Slot 1) available for use with a riser card.
1-2
®
®
E5-2600 series
Advertisement
Table of Contents
