Troubleshooting - Stanley PBD1200 User Manual

The tool won't crimp when I press the trigger.
The InteLED flashes yellow when I activate the tool.
The tool repeatedly give me bad crimps / The InteLED
flashes red after every crimp.
The tool is leaking hydraulic oil.
The tool is not saving data or will not connect to
STANLEY Crimp software.
14 ► PBD1201 User Manual

TROUBLESHOOTING

Problem Solution
Ensure the battery is charged. Disengage the trigger
lock.
The maintenance interval is about to elapse. Have the
tool serviced as soon as possible.
Ensure the battery is fully charged. Ensure the dies
are inserted properly into the crimping head. If problem
persists, have the tool serviced as soon as possible.
Have the tool serviced immediately.
Have the tool serviced as soon as possible.