Auto · Cool · Dry · Fan · Heat Operation - Daikin FTXC25BV1B Operating Manual

AUTO ● COOL ● DRY ● FAN ● HEAT Operation
 To start operation
1. Press button to start the unit operation.
2. Press MODE button to choose the desired
operation mode.
• Each pressing on the button advances the available operating
mode in sequence below:
COOL DRY
 To stop operation
3. Press button again to stop the unit operation.
• Note
Operating Mode
COOL
DRY
FAN
HEAT
AUTO
 Notes on the operating conditions
• The air conditioner will always consume a small amount of electricity even in standby mode.
• Ensure that the power supply / breaker is switch off if the air conditioner is not going to be used
for an extended period of time.
FAN HEAT
Description
The air conditioner cools down the room by releasing the heat to outdoor
unit.
The air conditioner operates to control the room humidity by regulating the
indoor unit fan speed. Therefore, manual adjustment of the fan speed in
DRY mode is not available.
The air conditioner indoor unit will run in fan only.
The air conditioner heats up a room to be temperature setpoint.
The air conditioner cools down or heats up a room to the temperature
setpoint. It automatically switches between cooling and heating if necessary.
1, 3
AUTO
1-10
MODE
2