Table of Contents
Advertisement
2.
Pull up the socket lever.
3.
Insert the CPU with the attached heatsink and fan. Make sure
that pin 1 of the CPU aligns with the hole 1 of the socket. The
notched corner on the CPU indicates pin 1.
4.
Pull down the socket lever to lock the CPU into the socket.
Step 2
Step 4
5.
Plug the fan cable into the fan connector. The board has one 2-
pin and one 4-pin fan connector. See the section Connectors for
more details on fan connectors.
6.
Set the jumpers accordingly. See the following sections for the
correct jumper settings.
User's Guide
Hardware Setup
Step 3
2-3
Advertisement
Table of Contents
