Table of Contents
Advertisement
Installation of Indoor Unit
Location of the device
• It is obligatory to consider the minimal clearance from obstacles for ensuring unobstructed access
for maintenance and service.
• The location of the device has to be accessible with manual transport devices to ensure undis-
turbed delivery of replacement parts and equipment for maintenance and servicing. The operator
is charged costs connected with hiring special equipment for installing the device, servicing and
maintenance separately, these costs are not subject of the warranty.
• When you install the device into the building, make sure that you build in a water drain which will
serve as a water drain in case of spillage.
Minimal clearance from the device
The device must not be installed under pipelines because there is a possibility of condensate form-
ing. Ingress of water condensate can cause disturbances in the operation.
The installation location of the indoor unit must be dry and in the temperature range between +10
C and 40 °C.
16 Air-to-Water Heat Pump
Advertisement
Table of Contents
