LG 55EW960H Commercial Mode Setup Manual page 8

Commercial Mode Overview (Cont.)
FTG Mode Features
FTG Mode provides the following features:
• Logical or physical channel tuning of physical RF channels and Aux inputs.
• Logical channel tuning of IP streams.
• Mapping of RF channels with minor (program) numbers up to 999.
• FTG Channel Map of up to 600 channels.
• Start Channel set for RF, Aux input, or IP delivered content.
• Pro:Centric data delivery over RF or IP.
• TV Zoning (including channel restrictions by Zone) and Wi-Fi Zoning options for location-specific
configuration.
LG's FTG File Manager PC software enables you to create an FTG Configuration (.tlx) file, which may be
used to configure the CPU for FTG Mode. FTG File Manager utilities enable you to create/edit an FTG
Channel Map and configure Installer Menu settings. You can also create a Clone (.tlx) file from a Master TV
Setup that may be used to configure the CPU for FTG Mode.
Note: TV Zoning and Wi-Fi Zoning features are supported via ".tlx" file. See Reference section, "Using the
TV's Zoning Features," for further information.
In this mode, the TV's CPU must be configured with an FTG Channel Map and FTG Installer Menu settings
using one of the following processes:
• Local: Configure an individual EW960H TV via its USB port using a USB memory device / ".tlx" file. The
file may be either a Clone file (see "Cloning Procedures" on pages 44 to 49) or an FTG Configuration
file (see "FTG File Manager Utilities Overview" on pages 50 to 55).
• Remote: Configure all EW960H TVs at the site using a Pro:Centric server head end device (Example:
PCS200S). Refer to the Pro:Centric Server Admin Client User Guide for further information.
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• Any FTG configuration changes must be made using a ".tlx" file (typically edited in the FTG File Manager).
The FTG File Manager's FTG Channel Map Configuration and FTG Installer Menu Configuration Utilities
enable you to make changes, respectively, to the FTG Channel Map and FTG Installer Menu settings as
necessary. See information on local configuration in this document or refer to documentation for the server
for information on remote management.
• If it becomes necessary to restore the TV to Pass-through Mode, there are several options that will enable
you to do so. Refer to Reference section, "Restoring Factory Defaults on the TV(s)," for further information.
Pages 50 to 55 provide overviews of the utilities that comprise the FTG File Manager. Refer to the
Free-To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager.
Remote Management in FTG Mode
When the TV is configured for FTG Mode, remote management of the FTG Channel Map and FTG
Installer Menu settings is provided by a Pro:Centric server, via a Clone/Configuration (.tlx) file loaded
on the Pro:Centric Admin Client. Refer to the Pro:Centric Server Admin Client User Guide for further
information.
8
206-4307