LG 55EW960H Commercial Mode Setup Manual page 47

• If the Target TV is currently in Pass-through Mode and you intend to use the TV's Zoning
feature(s)—i.e., the Clone/Configuration (.tlx) file you are importing contains an FTG Channel
Map and/or FTG profile(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to assign
the appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure
below. See Reference section, "Using the TV's Zoning Features," for further information.
• If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode,
as applicable, after the Clone/Configuration (.tlx) file is imported, ensure the ".tlx" file does not
contain an FTG Channel Map; otherwise, the import procedure will result in the Target TV(s)
being configured for FTG Mode.
• If a Clone (.tlx) file (exported Master TV Setup) contains an FTG Channel Map, the physical RF
channels in the FTG Channel Map have been assigned logical channel numbers (see "Exporting
a Clone File" above). When you import the Clone file with the FTG Channel Map on the Target
TV(s), you will have the option to select either logical or physical channel tuning. Even if you
select physical channel tuning, the (list of) physical RF channels in the FTG Channel Map will
remain in logical order.
• If an FTG Configuration (.tlx) file (created in the FTG File Manager) contains an FTG Channel
Map, each logical channel number in the FTG Channel Map has been assigned a physical RF
channel, an IP channel, or an Aux input (the latter designated by 130-0 through 137-0—see also
Reference section, "TV Aux Input Configuration").
Note: If the FTG Channel Map includes RF channels and Aux inputs only, when you import
the FTG Configuration file on the Target TV(s), you will have the option to select either logical or
physical channel tuning. If you select physical channel tuning, the physical RF channels and
Aux inputs in the FTG Channel Map will remain in logical order. Physical channel tuning is not
available when the FTG Channel Map includes IP channels.
• If the Clone/Configuration (.tlx) file was edited/created in the FTG File Manager, it may contain
multiple zoned FTG Installer Menu profiles for different TV models. Make sure it includes the
appropriate Installer Menu profile(s) for the Target TV(s) before performing the procedure below.
Caution: Do not unplug the TV power cord or remove the USB memory device while
importing is in progress, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Import Clone File Procedure
1. Turn ON the Target TV.
2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you
turn ON the TV:
• If the wizard is displayed, you can complete the import procedure via the wizard, as indicated
above (see "Before You Begin"). However, to continue with this procedure and access the
"Import Clone File" option from the TV menus, exit the EZ-Manager Wizard. Then, continue
with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If applicable (see also "Before You Begin" above), make sure to assign the appropriate Zone
designation(s) in the Target TV at this time.
206-4307
Cloning Procedures (Cont.)
(Continued on next page)
47