LG 55EW960H Commercial Mode Setup Manual page 48

Cloning Procedures (Cont.)
(Continued from previous page)
Note: In order for the proper location-specific TV Zone and/or Wi-Fi Zone profile
data to be applied, the Zone designation(s) must be assigned in the Target TV(s)
BEFORE importing is initiated.
4. Insert the USB memory device with the Clone/Configuration (.tlx) file into either of the USB
ports on the Target TV.
5. Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings
advanced TV setup menus.
7. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number "7" key
a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Select the file(s) to download, and then select UPDATE below.
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
8. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the ".tlx" file you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button in the top right corner of the screen
and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the appropriate
USB device from the pop-up list of USB devices displayed at the top of the screen.
9. Use the Up/Down arrow keys to select Import Clone File, and then press the Wheel (OK) button.
A list of the ".tlx" files stored in the root folder of the USB memory device will be displayed on
the screen.
48
menu icon and press the Wheel (OK) button to access the
Update TV Software
Current TV Software Version: version#
EW960H_CPU_SW.epk
filename .epk/Version: version#
Update PTC Software
filename .epk/Version: version#
EW960H_PTC_SW.txt
filename .epk/Version: version#
Import Clone File
EW960H_IM.tlx
UPDATE
X
USB DEVICE
USB Device
USB 1: Device 1
USB 2: Device 2
(Continued on next page)
206-4307