LG 55EW960H Commercial Mode Setup Manual page 28

Ez Download Utility (Cont.)
(Continued from previous page)
7. If it is not currently selected, use the arrow keys to select Ez Download, and then press the
Wheel (OK) button.
As illustrated on the previous page, when Ez Download is selected, a list of up to three files is
displayed on the screen, one each of the TV Software (CPU) and PTC Software files stored
in the LG_DTV folder and the Clone/Configuration (.tlx) files stored in the root directory on the
USB device.
Note: Select the button in the top right corner of the screen, as necessary, to exit the TV
X
Manager. If you accessed the TV Manager via the EZ-Manager Wizard, you will be returned
to the last screen on display before you selected "USB Configuration." If you accessed the TV
Manager via the TV menus, you will be returned to program viewing.
8. To select a file:
• Use the arrow keys on the Installer Remote to select/highlight the appropriate file type field,
and then press the Wheel (OK) button. A list of available files will be displayed to the right of
the file type fields.
• Then, use the arrow keys to select the desired file.
Note: The utility will only allow you to select one of each file type for downloading. For example,
if there are two files in the Ez Download "Import Clone File" list, you can only select one or the
other of those two files.
Note: The initial default value for each file type is "None." After the Ez Download utility is run,
a file is automatically created and stored on the USB device that was used. The file, which
will have a ".dzm" file extension, maintains a history of the file(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
file(s) selected for the last download will be pre-selected for the current download, thus
facilitating the process of configuring additional TVs of this model using the same USB device.
Note: The current TV software (CPU) or PTC software version is always displayed above the
listing of available TV software and PTC software files, respectively. Ensure the software version
of the selected file is the correct version before applying the update to this TV.
9. If a Clone/Configuration (.tlx) file that includes an FTG Channel Map is selected, a Channel
Tuning / Channel Banner Display field will be displayed at the right of the screen. If the FTG
Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0
through 137-0), you can choose the format for the channel tuning/banner display. Use the
arrow keys on the Installer Remote to select Logical tuning or Physical tuning. A checkmark
will appear at the left of the selected option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
selected ".tlx" file does not include an FTG Channel Map, the message, "No Channel Map in
Clone file," will be displayed at the right of the screen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE,
and then press the Wheel (OK) button.
28
(Continued on next page)
206-4307