Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Click the SAVE button.
When all needed settings are configured, click the APPLY button.
Routing Call
On the VoIP / Routing Call page, you can fill in the phone book for a devices connected to the
FXS ports of the router. To do this, go to the relevant tab (the Line 1 or Line 2).
In the Speed Dial section, you can assign phone numbers to the digital keys of the phone set
connected to this line. To do this, left-click the line corresponding to the key of the phone set. In the
opened window, enter the needed number in the Number field and click the SAVE button. Also
you can specify a number in the format phone_number@IP_address for direct IP calls
bypassing the SIP proxy server.
To change or delete the number assigned to the digital key, left-click the line corresponding to the
key of the phone set, in the opened window, edit or remove the value of the Number field and click
the SAVE button.
To use a number specified in the Speed Dial section, press # (the pound key) on the phone set,
then press the relevant digital key.
Figure 167. The VoIP / Routing Call page. The Line 1 tab.
Page 218 of 266
Configuring via Web-based Interface
Advertisement
Table of Contents
