Creating Lte Wan Connection - D-Link DWR-980 User Manual

DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual

Creating LTE WAN Connection

If the PIN code check is enabled for the SIM card inserted into the built-in modem, then prior to
creating an LTE WAN connection, go to the LTE Modem menu and enter the PIN code on the page
displayed (see the LTE Modem section, page 169). Then go to the Connections Setup / WAN
page and click the ADD button (
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 93. The page for creating a new LTE connection. Selecting a connection type.
Parameter
Enable connection
Connection name
) in the Connections List section. On the opened page, go to
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 118 of 266
Configuring via Web-based Interface
Description