Commands Executed During Routing; Table 4 Commands Executed During Call Routing - D-Link DVX-7090 User Manual

To add a new rule to the routing table, click
To update the table view, click
click
click
The DVX-7090 Router processes call handling rules in the table in the order of precedence;
therefore, the rule that is higher in the table takes precedence of the rule located closer to the
table bottom.
4.5.1 C
OMMANDS EXECUTED DURING ROUTING
The items on the drop-down list of the combo box Command on the routing rule form fall under
two categories – the commands pertaining to the routing process and call handling commands

Table 4 Commands executed during call routing

Routing control commands
Command
Continue
Restart
Call handling commands
Command
Reject
Dial User
Dial Gateway
DVX-7090 VoIP Router
-
Service
shows the name of the invoked service (when the command is Service )
or the name of the target gateway (when the command is Dial gateway).
includes the button
the rule you are configuring into a group, select the necessary checkbox in the
displayed groups dialog box and click
Note:
The configured rule will apply only if the call originator and the rule belong
to the same access group.
The column
- – move the record one line up (see 4.5.2)
- – move the record down one line (see 4.5.2)
- – duplicate the record.
- – delete the record.
to delete the record
to duplicate the record
What the system does in response
Goes to the next routing rule. The command Continue is commonly used to
resume routing after number transformation.
Goes to the first rule in the table
Argument
GW name
that invokes the groups dialog. To include
displays the following buttons:
.
What the system does in response
Rejects the call
1. Compares the destination number against the
database of configured extensions
2. if the matching number is found, dials the
extension number, otherwise
3. executes Continue
Sends the call to the specified gateway
Configuration
.
.
page 32 of 83