Routing Call - D-Link DVG-N5402SP User Manual

DVG-N5402SP Wireless Router with 1 FXS Port
Configuring via Web-based Interface
User Manual

Routing Call

On the VoIP / Routing Call page, you can fill in the phone book for a device connected to the
FXS port of the router.
Figure 118. The VoIP / Routing Call page.
In the Speed Dial section, you can assign phone numbers to the digital keys of the phone set
connected to this line. To do this, left-click the line corresponding to the key of the phone set. In the
opened window, enter the needed number in the Number field and click the SAVE button. Also
you can specify a number in the format phone_number@IP_address for direct IP calls
bypassing the SIP proxy server.
To change or delete the number assigned to the digital key, left-click the line corresponding to the
key of the phone set, in the opened window, edit or remove the value of the Number field and click
the SAVE button.
To use a number specified in the Speed Dial section, press # (the pound key) on the phone set,
then press the relevant digital key.
In the Abbreviated Dial section, you can assign short numbers (as a rule, such numbers consist of
two or three digits) to frequently used phone numbers. To do this, click the ADD button ( ). In
the opened window, enter a short number in the Source number field, then enter the actual phone
number in the Destination number field. Click the SAVE button. Also in the Destination
number field you can specify a number in the format phone_number@IP_address for direct
IP calls bypassing the SIP proxy server.
To change a short or actual phone number, select of the relevant line in the table. In the opened
window, change needed parameters and click the SAVE button.
To remove a phone number, select the checkbox located to the left of the relevant line in the table
and click the DELETE button ( ).
Page 149 of 188