Operating The Mower Blade-Control Switch (Pto); Operating The Throttle; Operating The Choke - Toro TimeCutter HD ZX4800 Operator's Manual

Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the mower
blades and any powered attachments.
Engaging the Blade-Control Switch
(PTO)
Note: Always engage the blades with the throttle in the F
position (Figure 16).
Disengaging the Blade-Control Switch
(PTO)
G008945
Figure 15
Figure 16
G009174
Figure 17

Operating the Throttle

You can move the throttle control between the F
S positions (Figure
LOW
Always use the F
AST
deck with the blade-control switch (PTO).
g008945
AST

Operating the Choke

Use the choke to start a cold engine.
1. If the engine is cold, use the choke to start the engine.
2. Pull up on the choke knob to engage the choke before
using the key switch
3. Push down on the choke to disengage the choke after
the engine has started
1
g187516
2
g009174
1. O position
N
17
18).
position when turning on the mower
Figure 18
(Figure 19).
(Figure 19).
G008959
Figure 19
2. O position
FF
and
AST
g187517
g008959