Photo Search/Date Search - Canon Optura 300 Instruction Manual

Photo Search/Date Search

You can search for a still image recorded
anywhere on the tape with the photo search
function, or locate the change of the
date/time zone with the date search function.
CAMERA
1. Press the SEARCH SELECT button to choose between
photo search and date search.
"PHOTO SEARCH" or "DATE SEARCH" appears.
2. Press the + or - button to begin searching.
• Press the + button to search forward and the - button to
search backward.
• Press more than once to search for further still images or date
changes (up to 10 times).
• Press the + or - button to change the search direction.
• Press the 3 (stop) button stop searching.
❍ Photo search: A still image recorded very close to the point you start the search
may not be detected.
❍ Date search: A recording of longer than a minute per date/area is required.
❍ Date search: Playback may start slightly before or after the date change.
❍ Date search may not function if the data code is not correctly displayed.
PLAY (VCR)
SEARCH SELECT button
Search buttons
STOP 3 button
CARD CAMERA CARD PLAY (VCR)
START
ZOOM
/STOP
PHOTO W T
SELF T.
SEARCH SELECT
12bit
MIX BALANCE
TV SCREEN
AUDIO OUT ST-1 ST-2
CARD
DATA CODE
PLAY MODE D.EFFECTS ON/OFF
START
ZOOM
/STOP
PHOTO W T
SELF T.
SEARCH SELECT
12bit MIX BALANCE
TV SCREEN
AUDIO OUT ST-1 ST-2
CARD
DATA CODE
D EFFECTS ON/OFF
PLAY MODE
E
85