Table of Contents
Advertisement
When You Have Finished Recording
1. Turn the POWER switch to OFF.
2. Close the LCD panel.
E
3. Replace the lens cap.
4. Unload the cassette.
5. Disconnect the power source.
When recording outdoors or through a window, do not leave LCD screen,
viewfinder or lens exposed to direct sunlight as it may cause damage.
❍ Turn the power off if you do not intend to use the camcorder for a longer
time.
❍ When you start recording, the camcorder counts from 1 second to 10 seconds
(recording reminder). Recordings shorter than 10 seconds may be difficult to
edit later. On the other hand, a recording not containing a particular action
should generally last no longer than 10 seconds.
❍ The camcorder will shut off after 5 minutes when left in record pause mode to
protect tape and video heads. "
before shutoff. To continue recording, turn the POWER switch to OFF and then
back to CAMERA.
❍ For when to use the [ (Easy Recording) or
the Recording Programs (
❍ When you do not remove the cassette, you can record the next scene without
producing any noise or blank sections between the recordings even if you turn
the camcorder off.
❍ For extra recording time, see Changing the Recording Mode (
❍ About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This
has no effect on the recorded image and does not constitute a
malfunction.
28
AUTO POWER OFF" appears 20 seconds
Q
(program AE) mode, see Using
58).
52).
Hide quick links:
Advertisement
Table of Contents
