Philips Momentum 279M1 User Manual page 8

2. Setting up the monitor
3 Connecting to your PC
1 2 3 4 5 6 7 8 9 10 11 12
1 2
USB hub
1
1
USB A-B
USB C-C
1-1
1-2
USB Type-C
1
AC/DC power input
2
DisplayPort input
3 HDMI-1 input
4 HDMI-2 input
5 HDMI-3 input
6
AUDIO OUT
7
USB C
8 USB UP
9 USB downstream/USB fast charger
13
Fast Charger
2
2
1 2
USB C
2
1
10 USB downstream
11
USB downstream/USB fast charger
12
USB downstream
13 Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state.
5
USB charging
This display has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon
can use these ports to charge your
Smart phone or power your external
HDD, for example. The display must be
powered ON at all times to be able to
use this function.
6
). You