Setting Up The Monitor; Installation - Philips Momentum 279M1 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

1 Package contents
* DP
*USB C-C
*Different according to region
Note
Use only AC/DC adapter model:
FSP230-AJAN3-T/ ADP-230JB DH.
Momentum
279M1
278E9
Quick
Start
Register your product and get support at
www.philips.com/welcome
AC/DC Adapter
* HDMI
* USB A-B
2 Install the base
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3. After attaching the base, erect the
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. When you pull out the
styrofoam, do not squeeze the
panel to avoid broken panel.
5