Troubleshooting - Alcatel one touch 213 Manual

Hide thumbs Also See for one touch 213:
Table of Contents

Advertisement

19

Troubleshooting ................

Before contacting the aftersales department, you are advised to follow the
instructions below:
You are advised to switch off the telephone from time to time to
optimise its performance.
You are advised to fully charge (
Avoid storing large amounts of data in your telephone as this may affect
the performance of your telephone.
and carry out the following checks:
My mobile phone will not switch on
Press
until the screen comes on
Check the battery charge level
Check the battery contacts, remove and reinstall your battery, then turn
your telephone back on
My phone has not responded for several minutes
Press the
key
Remove the battery and re-insert it, then switch the phone back on
My screen is difficult to read
Clean your screen
Use your mobile phone in accordance with the recommended
conditions of use
My mobile phone turns off by itself
Check that your keypad is locked when you are not using your mobile
phone
Check the battery charge level
All manuals and user guides at all-guides.com
) the battery for optimal operation.
51
My mobile phone has a low level of autonomy
Make sure you respected the complete charge timing (minimum 3
hours)
After a partial charge, the battery level indicator may not be exact. Wait
for at least 20 minutes after removing the charger to obtain an exact
indication
My mobile phone will not charge properly
Make sure that your battery is not completely discharged; If the battery
is flat, it may take around 20 minutes to display the battery charger
indicator on the screen
Make sure charging is carried out under normal conditions (0°C-
+40°C)
Make sure your battery is inserted. It must be inserted before plugging
in the charger
Make sure you are using an Alcatel battery and charger in the box
When abroad, check that the electrical current is compatible
My mobile phone will not connect to a network
Try connecting in another location
Verify the network coverage with your operator
Check with your operator that your SIM card is valid
Try selecting the available network(s) manually
Try connecting at a later time if the network is overloaded
SIM card error
Make sure the SIM card has been correctly inserted
Verify with your operator that your SIM card is 3V or 1.8V compatible;
the old 5V SIM cards cannot be used
Make sure the chip on your SIM card is not damaged or scratched
Unable to make outgoing calls
Make sure you have dialled a valid number and press the
For international calls, check the country and area codes
Make sure your mobile phone is connected to a network, and that the
network is not overloaded or unavailable
key
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

One touch 113One touch 112

Table of Contents