Advertisement
Step 8
W21 ctr
(6)
The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measuring
from the ends of angles, place a stud
between each corner and splice post
at the rear of building and 2 studs
between corner posts at the sides.
Position stud inside top angle and
fasten with a screw at the lower hole.
2
Rest bottom tab (large hole) out-
side oor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
Parts Needed For
Studs
21
9344 Siding Stud (6)
FASTEN STUD AT
LOWER HOLE
9344
DO NOT FASTEN TAB
LARGE HOLE
AT THIS TIME
Advertisement
